AE-MH Standard Mount Hardware allows maximum variation in collector mounting positions. The 6063-T6 hinges are quickly locked onto the collector frame by a stainless steel locking bolt. The front hinges are fitted into heavy roof mount brackets, and the rear hinges are attached to the 1” aluminum square tube to conveniently tilt the collector at optimum position. This hardware set comes complete with all stainless steel bolts and nuts.

AE-FM Flush Mount Hardware is a time and cost saving technique that is used when mounting collectors in the same plane as the roof. Each of the four brackets is quickly locked onto the collector frame by a stainless steel locking bolt. The collector is held 3” above the roof surface to allow water and debris to flow down the roof freely. This flush mount hardware is truly an attractive and cost saving option for solar collector mounting.

AE-RM Rack Mount Hardware is an excellent collector attachment device for use in commercial arrays.When a site constructed collector rack is used, these clips provide a very fast and inexpensive mount. As in all AET, Inc . Hardware, a stainless locking bolt locks the clip to the collector frame. Each of the four brackets is color matched to the collector and provides a lightweight and attractive attachment.

MSC-MH Standard Mount Hardware allows maximum variation in collector mounting positions. The 6063-T6 hinges are quickly locked onto the collector frame by a stainless steel locking bolt. The front hinges are fitted into heavy roof mount brackets, and rear hinges are attached to the 1” aluminum square tube to conveniently tilt the collector at optimum position. This hardware set can also be used in flush mount applications.

MOUNTING HARDWARD SPACING